ÃÛÌÒÓ°Ïñ

84AS SPEC 184 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: Saddle Stop (3/8" X 5/8"), Pemko #184AS

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone:(800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

.

HOUSING:

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C

* [184AS Mill finish, 184DS Dark bronze anodized,

184GS Gold anodized].

Architectural bronze (brass), Extruded

* CDA alloy 38500 (56.5% Copper, 2.75% Lead, 40.7% Zinc,

0.05% alum.)

* [184BS Mill finish, Oxidized & oil rubbed, Polished,

Satin brush]

SEAL:

Silicone Rubber, Extruded

* Federal Specification ZZ-R-755 Class 2A Grade 60 Type I & II

* -100 F. to +400 F.

4. TEST & CODE COMPLIANCE

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2 Hours.

Listed and Labeled as Gasketing Materials.

Tested in accordance with UL10B by Underwriters

Laboratory, Inc. .

Smoke Label: Labeled as Gasketing for Smoke Control Doors.

Tested per NFPA 105 by Wyle Laboratories.

5. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

Carefully trim to fit within the stops of frame opening.

Trim seal to 1/16" longer than trimmed saddle stop on

each end. Press against door to assure good seal, (do not

over tighten - installer should be able to slip business card

between seal and door). Fasten to threshold with #10 x 3/4"

flat head self tapping machine screws.

6. WARRANTY: Guaranteed by manufacturer against defects in

material or workmanship for 3 years.