PEMKO
234. CSI 3-Part Specifications.
234APK SPEC 234 Rev May 1995
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: Door Shoe, Flat with PemkoPrene Seal
(For 1-1/4" or wider Door), Pemko #234APK
2. MANUFACTURER
PEMKO * VENTURA PEMKO * MEMPHIS
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone: (800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
DOORSHOE:
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C
* [234APK Mill finish, 234DPK Dark bronze anodized,
234GPK Gold anodized].
SEAL:
PemkoPrene , Extruded thermoplastic elastomer
* Flexable between -70 F and +250 F
* Excellent flex fatigue
* Outstanding ozone resistance
4. TEST & CODE COMPLIANCE:
Fire Label: Classified By UL For Application To Swinging
Type Fire Doors of the Hollow Metal or Steel
Covered composite type Rated up to 3 Hours, or
Wood Core Fire Doors rated up to 1-1/2 Hours.
Listed and Labeled as Gasketing Materials.
Tested in accordance with UL10B by Underwriters
Laboratory, Inc. .
Smoke Label: Smoke tested by WYLE Laboratories in accordance
with UL 1784-90; meets the requirements of NFPA
105
5. INSTALLATION:
Installation to be performed in strict accordance with
manufacturer's instructions furnished with product.
Note: door must be removed from hinges to inatall. Remove
PemkoPrene seal and cut housing to door width. Fasten to
door bottom with #6 x 5/8" sheet metal screws provided.
Trim PemkoPrene seal to 1/16" longer than housing and reinsert.
6. WARRANTY:
Guaranteed by manufacturer against defects in material or
workmanship for 3 years.