236. CSI 3-Part Specifications.
36A SPEC 236 Rev May 1994
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: Carpet Separator (7/16" x 1-3/4"), Pemko #236A
2. MANUFACTURER:
PEMKO * Ventura PEMKO * Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone:(800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C
* [236A Mill Finish,236BDG Bright dip gold anodized 236D
Dark bronze anodized, 236G Gold anodized].
Architectural bronze (brass), Extruded
* Note: Brass is fluted both sides.
* CDA alloy 38500 (56.5% Copper, 2.75% Lead, 40.7% Zinc,
0.05% alum.)
* [236B Mill finish, Oxidized & oil rubbed, Polished, Satin
brush]
4. TEST & CODE COMPLIANCE
Handicapped: Complies with ANSI A117.1-1980, ADA 1990; and
ADAAG 1991 guidelines.
Fire Label: Classified By UL For Application To Swinging
Type Fire Doors of the Hollow Metal or Steel
Covered composite type Rated up to 3 Hours, or
Wood Core Fire Doors rated up to 1-1/2 Hours.
Listed and Labeled as Gasketing Materials.
Tested in accordance with UL10B by Underwriters
Laboratory, Inc. .
Smoke Label: Labeled as Gasketing for Smoke Control Doors.
Tested per NFPA 105 by Wyle Laboratories
5. INSTALLATION:
Installation to be performed in strict accordance with
manufacturer's instructions furnished with product.
Trim to size. Carefully tuck edge of carpets under sides of
carpet separator. Fasten with flat head wood or machine
screws provided and appropriate anchors as required.
6. WARRANTY:
Guaranteed by manufacturer against defects in material or
workmanship for 3 years.