PEMKO
249. CSI 3-Part Specifications.
49AV SPEC 249 Rev May 1995
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: Adjustable Vinyl Top Threshold (5/8" X 3-1/2"),
Pemko #249AV
2. MANUFACTURER:
PEMKO * Ventura PEMKO * Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone:(800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
THRESHOLD:
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C
* [249AV Mill finish, 249DV Dark bronze anodized,
249GV Gold anodized, 249BDGV Bright dip gold anodized,
249PWV Painted white].
SEAL:
Vinyl, Flexible, Extruded Geon (Virgin material)
* Geon is a registered trade mark of B.F. Goodrich
* ASTM D2287-81
4. TEST & CODE COMPLIANCE:
Fire Label: Classified By UL For Application To
Wood Covered Composite and Wood Core
Type Fire Doors rated up to 20 minutes.
Listed and Labeled as Gasketing Materials.
Tested in accordance with UL10B by
Underwriters Laboratory, Inc. .
5. INSTALLATION:
Installation to be performed in strict accordance with
manufacturer's instructions furnished with product.
Carefully cope to fit within the frame opening. Trim vinyl
seals to 1/16" longer than trimmed threshold on each end.
Make sure that vinyl-top sets directly under door. Lift
vinyl-top on free edge, revealing adjusting screws and
mounting holes.
Fasten with flat head wood or machine screws provided and
appropriate anchors as required. Use a sealant or compound at
all edges and joints Adjust each adjusting screw until
approximately 1/4" remains between the bottom of the door
when closed. Insert free edge of vinyl-top into slot. Inspect
to see that the vinyl-top is sealing against the bottom of
the door.
6. WARRANTY:
Guaranteed by manufacturer against defects in material or
workmanship for 3 years.