PEMKO
253X4FG. CSI 3-Part Specifications.
53X4AFG SPEC 253X4FG Rev May
1995
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: Thermal-Break Saddle w/Vinyl (1/2" x 7-1/8"),
Pemko #253X4AFG
2. MANUFACTURER:
PEMKO * Ventura PEMKO * Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone:(800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
THRESHOLD:
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C
* [253X4AFG Mill finish, 253X4DFG Dark bronze anodized,
253X4GFG Gold anodized].
Architectural bronze (brass), Extruded
* CDA alloy 38500 (56.5% Copper, 2.75% Lead, 40.7% Zinc,
0.05% alum.)
* [253X4BFG Mill finish, Oxidized & oil rubbed, Polished,
Satin brush]
VINYL THERMAL BREAK:
Vinyl, Rigid, Extruded Geon (Virgin material)
* Geon is a registered trade mark of the Geon
Co.
* ASTM D1784-90 Class 16344
4. TEST & CODE COMPLIANCE:
Handicapped: Complies with CABO/ANSI A117.1-1992, ADA 1990;
and ADAAG 1991 guidelines.
5. INSTALLATION:
Installation to be performed in strict accordance with
manufacturer's instructions furnished with product.
Carefully cope to fit within the frame opening. Fasten with
flat head wood or machine screws provided and appropriate
anchors as required. Use a sealant or compound at all edges
and joints.
6. WARRANTY:
Guaranteed by manufacturer against defects in material or
workmanship for 3 years.