ÃÛÌÒÓ°Ïñ

283A SPEC 283 REV MAY 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT DOCUMENTS.

1. PRODUCT: Saddle Elevator (1/2" X 1"), Pemko #283A

SPECIFIER NOTE:

THIS PRODUCT GENERALLY NOT USED ALONE, BUT TYPICALLY IN WELDED

ASSEMBLY WITH SADDLE THRESHOLD COMPONENTS. FOR FURTHER DETAILS SEE

PemCad MENU "SADDLE & FLOOR PLATE ASSEMBLIES" DRAWING ID #FTA006.

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone:(800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C

* [283A Mill finish, 283D Dark bronze anodized,

283G Gold anodized].

Architectural bronze (brass), Extruded

* CDA alloy 38500 (56.5% Copper, 2.75% Lead, 40.7% Zinc,

0.05% alum.)

* [283B Mill finish, Oxidized & oil rubbed, Polished,

Satin brush]

4. INSTALLATION:

Installation to be performed in strict accordance with

manufacturer's instructions furnished with product.

5. WARRANTY:

Guaranteed by manufacturer against defects in material or

workmanship for 3 years.