4301R. CSI 3-Part Specifications.
4301CRL SPEC 4301R Rev May 1995
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: Automatic Door Bottom with Closed Cell Neoprene Sponge
Seal (2-1/8" x 31/32"), Pemko #4301CRL
2. MANUFACTURER:
PEMKO * Ventura PEMKO * Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone:(800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
CASE HOUSING:
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C
* [4301CRL Clear anodized, 4301DRL Dark bronze anodized]
SEAL:
Neoprene, Expanded, Closed Cell, Extruded:
* ASTM D1056-85 Type 2C2
* Mil-R6130C Type II Grade C
* -67 F. to +170 F.
4. TEST & CODE COMPLIANCE:
Fire Label: Classified By UL For Application To Swinging
Type Fire Doors of the Hollow Metal or Steel
Covered composite type Rated up to 3 Hours, or
Wood Core Fire Doors rated up to 1-1/2 Hours.
Listed and Labeled as Gasketing Materials.
Tested in accordance with UL10B by Underwriters
Laboratory, Inc. .
Smoke Label: Smoke tested by WYLE Laboratories in accordance
with UL 1784-90; meets the requirements of NFPA
105-1989.
5. INSTALLATION:
Installation to be performed in strict accordance with
manufacturer's instructions furnished with product.
This automatic door bottom can be surfaced mounted or
semi-mortised. (Note: if fire labeling is required,
semi-mortise preparation must be done by the door
manufacturer.) Cut-down as required and fasten to door.
Adjust for proper contact with threshold.
6. WARRANTY:
Guaranteed by manufacturer against defects in material or
workmanship for 3 years.