ÃÛÌÒÓ°Ïñ

SOUND SEAL SYSTEM 1C SPECIFICATION ASD009 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: SoundSeal SYSTEM 1C (STC-40 WITH STC-43 WOOD DOOR)

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone (800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

THRESHOLD: PEMKO No. 2005AS (With Silicone Rubber Seal per

Federal Specification ZZ-R-755 Class 2A Grade

60 Type I or II, -100 F. to +400 F.)

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [2005AS, Mill Finish; 2005DS, Dark Bronze

Anodized; 2005GS, Gold Anodized]

Architectural Bronze (brass), Extruded,

* CDA Alloy 38500 (56.5% Copper, 40.7% Zinc,

2.75% Lead, .05% Aluminum;

* [2005BS, Mill Finish; Oxidized & Oil Rubbed,

Polished; Satin Brushed]

AUTOMATIC DOOR BOTTOM: PEMKO No. 434ARL

CASE HOUSING:

Aluminum, Extruded .

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* Mill Finish

SEAL:

Sponge neoprene, Extruded

* Neoprene, closed cell sponge per ASTM D 1056-85

Type 2

* MIL-R6130C Type II Grade C;

* Temperature range -67 F. to +170 F.

PERIMETER GASKETING: No. S88D

Silicone Rubber, Extruded

* Federal Specification ZZ-R-755 Class 2A Grade 60

Type I or II;

* Temperature Range:(Silicone) -100 F. to +400 F.

(Adhesive) -50 F. to +150 F.

* [S88D, Dark Bronze; S88TAN, Tan; S88W, White]

4.TEST & CODE COMPLIANCE:

Sound: STC-44 when tested per ASTM E90-90 & ASTM

E1408-91 in acoustical laboratory using STC-43

wood door (5.2 lbs/sq. ft.).

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2

Hours Listed and Labeled as Gasketing

Materials. Tested in accordance with UL10B

by Underwriters Laboratory, Inc. .

Smoke Label: Smoke tested by WYLE Laboratories in

accordance with UL 1784-90; meets the

requirements of NFPA 105.

Handicapped: Threshold complies with CABO/ANSI A117.1-

1992; ADA 1990; ADAAG 1991 Guidelines

5.INSTALLATION:

Installation to be performed in strict accordance with

manufacturers instructions furnished with product.

Threshold: Carefully cope to fit within frame opening.

Fasten with flat head wood or machine screws provided and

appropriate anchors as required. Use sealant or compound at

all edges and joints.

Automatic Door Bottom: Requires door factory fabricated

with full-mortise preparation. Note: When requested

Pemko supplies door preparation templates. Cut-down as

required and fasten to door (door must be removed from

frame). Adjust for proper contact with threshold.

Perimeter Gasketing: Clean surfaces and allow to dry

before applying. Apply continuously to jamb and stop

rabbet as shown, with joints between contiguous lengths

at corners only. Carefully miter or cope at corners to

ensure tight joints and continuous seal.

6 WARRANTY:

Guaranteed by manufacturer against defects in material or

workmanship for three years.