ÃÛÌÒÓ°Ïñ

SOUND SEAL SYSTEM 6 SPECIFICATION ASD017 Rev May 1995

SPECIFIER NOTE:

THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO

PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE

APPROPRIATE.

CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT

DOCUMENTS.

1. PRODUCT: SoundSeal SYSTEM 6 (STC-33 WITH STC-36 WOOD DOOR)

2. MANUFACTURER:

PEMKO * Ventura PEMKO * Memphis

4226 Transport Street 5535 Distribution Drive

Ventura, CA 93003 Memphis, TN 38141

Phone:(800) 283-9988 Phone (800) 824-3018

Fax: (800) 283-4050 Fax: (800) 243-3656

3. MATERIAL & FINISH:

SPECIFIER NOTE:

PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED

BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,

SELECT PARAGRAPH FOR MATERIAL YOU WANT.

EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.

MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL

ORDER.

THRESHOLD: PEMKO No. 271A

Aluminum, Extruded

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* [271A, Mill Finish; 271D, Dark Bronze Anodized;

271G, Gold Anodized]

AUTOMATIC DOOR BOTTOM: PEMKO No. 411ARL (If fire rating does

not allow full mortise application, substitute Pemko No.

4131CRL Surface mounted)

CASE HOUSING:

Aluminum, Extruded .

* Alloy Type 6063-T5

* Chemical and physical properties per the Aluminum

Association, Inc.

* Federal Specification QQ-A-200/9C.

* Mill Finish

SEAL:

Sponge neoprene, Extruded

* Neoprene, closed cell sponge per ASTM D 1056-85

Type 2

* MIL-R6130C Type II Grade C;

* Temperature range -67 F. to +170 F.

PERIMETER GASKETING: No. S88D

Silicone Rubber, Extruded

* Federal Specification ZZ-R-755 Class 2A Grade 60

Type I or II;

* Temperature Range:(Silicone) -100 F. to +400 F.

(Adhesive) -50 F. to +150 F.

* [S88D, Dark Bronze; S88TAN, Tan; S88W, White]

4.TEST & CODE COMPLIANCE:

Sound: STC-33 when tested per ASTM E90-90 & ASTM

E1408-91 in acoustical laboratory using

STC-36 wood composite door (8.45 lbs/sq.ft)

Fire Label: Classified By UL For Application To Swinging

Type Fire Doors of the Hollow Metal or Steel

Covered composite type Rated up to 3 Hours, or

Wood Core Fire Doors rated up to 1-1/2

Hours Listed and Labeled as Gasketing

Materials. Tested in accordance with UL10B

by Underwriters Laboratory, Inc. .

Smoke Label: Smoke tested by WYLE Laboratories in

accordance with UL 1784-90; meets the

requirements of NFPA 105-1989

Handicapped: Threshold complies with ANSI A117.1-1980;

ADA 1990; ADAAG 1991 Guidelines.

5.INSTALLATION:

Installation to be performed in strict accordance with

manufacturers instructions furnished with product.

Threshold: Carefully cope to fit within frame opening.

Fasten with flat head wood or machine screws provided

and appropriate anchors as required. Use sealant or

compound at all edges and joints.

Automatic Door Bottom: Requires door factory fabricated

with full-mortise preparation. Note: When requested

Pemko supplies door preparation templates. Cut-down

as required and fasten to door (door must be removed

from frame). Adjust for proper contact with threshold.

Perimeter Gasketing: Clean surfaces and allow to dry

before applying. Apply continuously to jamb and stop

rabbet as shown, with joints between contiguous lengths

at corners only. Carefully miter or cope at corners to

ensure tight joints and continuous seal.

6 WARRANTY:

Guaranteed by manufacturer against defects in material

or workmanship for three years.