PEMKO
ASD020. CSI 3-Part Specifications.
SMOKE SEAL SYSTEM 3 SPECIFICATION ASD020 Rev May 1995
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: PEMKO SmokeSeal SYSTEM No.3, TIGHT-JAMB SYSTEM
2. MANUFACTURER:
PEMKO * Ventura PEMKO * Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone:(800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
THRESHOLD: PEMKO No. 2005AS (With Silicone Rubber Seal per
Federal Specification ZZ-R-755 Class 2A Grade 60
Type I or II, -100 F. to +400 F.)
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the
Aluminum Association, Inc.
* Federal Specification QQ-A-200/9C.
* [2005AS, Mill Finish; 2005DS, Dark Bronze Anodized;
2005GS, Gold Anodized]
Architectural Bronze (brass), Extruded,
* CDA Alloy 38500 (56.5% Copper, 40.7% Zinc,
2.75% Lead,.05% Aluminum;
* [2005BS, Mill Finish; Oxidized & Oil Rubbed;
Polished; Satin Brushed]
PERIMETER GASKETING: No. S44D
Silicone Rubber, Extruded
* Federal Specification ZZ-R-755 Class 2A Grade 60
Type I or II;
* Temperature Range: (Silicone) -100 F. to +400 F.
(Adhesive) -50 F. to +150 F.
* Dark Bronze
4.TEST & CODE COMPLIANCE:
Fire Label: Classified By UL For Application To Swinging
Type Fire Doors of the Hollow Metal or Steel
Covered composite type Rated up to 3 Hours, or
Wood Core Fire Doors rated up to 1-1/2
Hours Listed and Labeled as Gasketing
Materials. Tested in accordance with UL10B
by Underwriters Laboratory, Inc. .
Smoke Label: Smoke tested by WYLE Laboratories in
accordance with UL 1784-90; meets the
requirements of NFPA 105.
Handicapped: Threshold complies with CABO/ANSI A117.1-
1992; ADA 1990; ADAAG 1991 Guidelines.
5.INSTALLATION:
Installation to be performed in strict accordance with
manufacturers instructions furnished with product.
Threshold: Carefully cope to fit within frame opening.
Fasten with flat head wood or machine screws provided
and appropriate anchors as required. Use sealant or
compound at all edges and joints
Perimeter Gasketing: Clean surfaces and allow to dry
before applying. Apply continuously to jamb and stop
rabbet as shown, with joints between contiguous lengths
at corners only. Carefully miter or cope at corners to
ensure tight joints and continuous seal.
6 WARRANTY:
Guaranteed by manufacturer against defects in material
or workmanship for three years.