PEMKO
ASD025. CSI 3-Part Specifications.
FIRE LABELED SYSTEM 2 (CROSS CORRIDOR) SPECIFICATION
ASD025 Rev May 1995
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: PEMKO FIRE LABELED SYSTEM No. 2, CROSS CORRIDOR PAIR
2. MANUFACTURER:
PEMKO * Ventura PEMKO * Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone:(800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
(OPTION) THRESHOLD: PEMKO No. 2364A
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [2364A, Mill Finish; 2364D, Dark Bronze Anodized;
2364G, Gold Anodized]
(OPTION) FLOOR PLATE: PEMKO No. 192A
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [192A, Mill Finish; 192D, Dark Bronze Anodized;
192G, Gold Anodized]
SPECIFIER NOTE: THE FOLLOWING ITEM SHOULD BE SPECIFIED ON AN AS
REQUIRED BASIS.
AUTOMATIC DOOR BOTTOM: PEMKO No. 4301CRL
CASE HOUSING:
Aluminum, Extruded .
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [4301BDGR, Bright Dip Gold Anodized; 4301CRL, Clear
Anodized; 4301DRL, Dark Bronze Anodized]
SEAL:
Sponge neoprene, Extruded
* Neoprene, closed cell sponge per ASTM D 1056-85
Type 2
* MIL-R6130C Type II Grade C;
* Temperature range -67 F. to +170 F.
PERIMETER GASKETING: PEMKO No. 290AS
HOUSING:
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [290AS, Mill Finish; 290DS, Dark Bronze Anodized;
290GS, Gold Anodized]
SEAL:
Silicone Rubber, Extruded
* Federal Specification ZZ-R-755 Class 2A Grade 60
Type I or II;
* Temperature Range: -100 F. to +400 F.
ASTRAGAL: PEMKO No. 357SP
(NOTE: 1/4-20 THRU BOLTS RECOMMENDED)
Steel, Hot Rolled
* AISI Type 1010
* Federal Specification QQ-S-636
* ASTM A245
* [357SP, Gray primed, 357SC, Zinc plated].
Stainless Steel (357SS)
* AISI Type 304
* #3 Finish
ASTRAGAL SEAL: PEMKO No. S88D
Silicone Rubber, Extruded
* Federal Specification ZZ-R-755 Class 2A Grade 60
Type I or II;
* Temperature Range:(Silicone) -100 F. to +400 F.
(Adhesive) -50 F. to +150 F.
* [S88D, Dark Bronze; S88TAN, Tan; S88W, White]
4.TEST & CODE COMPLIANCE:
Fire Label: Classified By UL For Application To Swinging
Type Fire Doors of the Hollow Metal or Steel
Covered composite type Rated up to 3 Hours, or
Wood Core Fire Doors rated up to 1-1/2
Hours Listed and Labeled as Gasketing
Materials. Tested in accordance with UL10B
by Underwriters Laboratory, Inc. .
Smoke Label: Smoke tested by WYLE Laboratories in
accordance with UL 1784-90; meets the
requirements of NFPA 105.
Handicapped: Threshold complies with CABO/ANSI A117.1-
1992; ADA 1990; ADAAG 1991 Guidelines.
5.INSTALLATION:
Installation to be performed in strict accordance with
manufacturers instructions furnished with product.
Threshold: Carefully cope to fit within frame opening.
Fasten with flat head wood or machine screws provided
and appropriate anchors as required. Use sealant or
compound at all edges and joints.
Automatic Door Bottom: Cut-down as required and fasten
to door. Adjust for proper contact with threshold.
Perimeter Gasketing: Fasten to header first, then jambs,
ensure contact at threshold, hold lightly against door
and install screws in center of slots (drill metal
frame 7/64" or #36) Carefully miter or cope at corners
to ensure tight joints and continuous seal. Adjust as
required and tighten screws.
Astragal: Cut astragal to match door height. Install on
required leaf with screws provided. (NOTE: through bolts
recommended).
Astragal seal: Clean surface and allow to dry before
applying. Apply to door edge adjacent astragal as shown.
6 WARRANTY:
Guaranteed by manufacturer against defects in material
or workmanship for three years.