PEMKO
ASD034. CSI 3-Part Specifications.
LIGHT SEAL SYSTEM (DARKROOM) SPECIFICATION ASD034 Rev 5-95
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: PEMKO LIGHT SEAL SYSTEM (DARKROOM)
2. MANUFACTURER:
PEMKO * Ventura PEMKO * Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone:(800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
THRESHOLD: PEMKO No. 173A
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [173A, Mill Finish; 173D, Dark Bronze Anodized;
173G, Gold Anodized]
Architectural Bronze (brass), Extruded,
* CDA Alloy 38500 (56.5% Copper, 40.7% Zinc,
2.75% Lead, .05% Aluminum;
* [173B, Mill Finish; Oxidized & Oil Rubbed;
Polished; Satin Brushed]
DOOR SHOE: PEMKO No. 234APK
HOUSING:
Aluminum, Extruded .
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [234AV, Mill Finish; 234DV, Dark Bronze Anodized;
234GV, Gold Anodized]
SEAL:
PemkoPrene , Extruded thermoplastic elastomer
* Flexable between -70 F and +250 F
* Excellent flex fatigue
* Outstanding ozone resistance
PERIMETER GASKETING: No. 312CR
HOUSING:
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C.
* [312CR, Clear Anodized; 312DR, Dark Bronze Anodized;
312GR, Gold Anodized]
SEAL::
Sponge neoprene, Extruded
* Neoprene, closed cell sponge per ASTM D 1056-85
Type 2
* MIL-R6130C Type II Grade C;
* Temperature range -67 F. to +170 F
4.TEST & CODE COMPLIANCE:
Fire Label: Classified By UL For Application To Swinging
Type Fire Doors of the Hollow Metal or Steel
Covered composite type Rated up to 3 Hours, or
Wood Core Fire Doors rated up to 1-1/2
Hours Listed and Labeled as Gasketing
Materials. Tested in accordance with UL10B
by Underwriters Laboratory, Inc. .
Smoke Label: Smoke tested by WYLE Laboratories in
accordance with UL 1784-90; meets the
requirements of NFPA 105.
Handicapped: Threshold complies with CABOANSI A117.1-
1992; ADA 1990; ADAAG 1991 Guidelines.
5.INSTALLATION:
Installation to be performed in strict accordance with
manufacturers instructions furnished with product.
Threshold: Carefully cope to fit within frame opening.
Fasten with flat head wood or machine screws provided
and appropriate anchors as required. Use sealant or
compound at all edges and joints.
Door Shoe: Provide shallow mortise as required. Cut
housing to length, fasten to bottom edge of door. Insert
seal, trim ends to touch jamb.
Perimeter Gasketing: Fasten to header first,then jambs,
ensure contact at threshold, hold lightly against door
and install screws in center of slots (drill metal
frame 7/64" or #36) Carefully miter or cope at corners
to ensure tight joints and continuous seal. Adjust as
required and tighten screws.
6 WARRANTY:
Guaranteed by manufacturer against defects in material
or workmanship for three years.