RAMP10. CSI 3-Part Specifications.
RAMP10A RAMP10 Rev May 1995
SPECIFIER NOTE:
THE FOLLOWING DATA IS INTENDED TO ASSIST IN SPECIFYING PEMKO
PRODUCTS. INCORPORATE IN A PROJECT SPECIFICATION WHERE
APPROPRIATE.
CAREFULLY REVIEW TO ENSURE COORDINATION WITH ALL CONTRACT
DOCUMENTS.
1. PRODUCT: Modular Ramp Component (1-1/2" to 1-3/4"x 3-1/8")
Pemko #RAMP10A
2. MANUFACTURER:
PEMKO * Ventura PEMKO * Memphis
4226 Transport Street 5535 Distribution Drive
Ventura, CA 93003 Memphis, TN 38141
Phone: (800) 283-9988 Phone (800) 824-3018
Fax: (800) 283-4050 Fax: (800) 243-3656
3. MATERIAL & FINISH:
SPECIFIER NOTE:
PRODUCT SELECTED IS AVAILABLE IN MATERIALS & FINISHES SPECIFIED
BELOW. WHERE MORE THAN ONE MATERIAL IS LISTED FOR A PRODUCT,
SELECT PARAGRAPH FOR MATERIAL YOU WANT.
EDIT BRACKETED TEXT TO SPECIFY FINISH. DELETE TEXT NOT DESIRED.
MATERIALS & FINISHES NOT LISTED MAY BE AVAILABLE BY SPECIAL
ORDER.
NOTE: PEMKO STRONGLY RECOMMENDS PemKote SKID RESISTANT SURFACE FOR
ALL MODULAR RAMP THRESHOLD COMPONENTS. THIS RUGGED ABRASIVE FINISH
IS EXTREMELY SKID AND CORROSION RESISTANT AND CARRIES A 10-YEAR
GUARANTEE.
Aluminum, Extruded
* Alloy Type 6063-T5
* Chemical and physical properties per the Aluminum
Association, Inc.
* Federal Specification QQ-A-200/9C
* [RAMP1oA Mill finish, RAMP10AK PemKote ].
4. TEST & CODE COMPLIANCE
Handicapped: Complies with CABO/ANSI A117.1-1992, ADA 1990; and
ADAAG 1991 guidelines.
Fire Label: Classified By UL For Application To Swinging
Type Fire Doors of the Hollow Metal or Steel
Covered composite type Rated up to 3 Hours, or
Wood Core Fire Doors rated up to 1-1/2 Hours.
Listed and Labeled as Gasketing Materials.
Tested in accordance with UL10B by
Underwriters Laboratory, Inc. .
5. INSTALLATION:
Installation to be performed in strict accordance with
manufacturer's instructions furnished with product.
Refer to system specifications ASD001 through ASD006, Modular
Ramp Systems for installation of this product.
6. WARRANTY:
Guaranteed by manufacturer against defects in material or
workmanship for 3 years.