{\rtf1\ansi\ansicpg1252\uc1 \deff0\deflang1033\deflangfe1033{\fonttbl{\f0\froman\fcharset0\fprq2{\*\panose 02020603050405020304}Times New Roman;}}{\colortbl;\red0\green0\blue0;\red0\green0\blue255;\red0\green255\blue255;\red0\green255\blue0;
\red255\green0\blue255;\red255\green0\blue0;\red255\green255\blue0;\red255\green255\blue255;\red0\green0\blue128;\red0\green128\blue128;\red0\green128\blue0;\red128\green0\blue128;\red128\green0\blue0;\red128\green128\blue0;\red128\green128\blue128;
\red192\green192\blue192;}{\stylesheet{\nowidctlpar\widctlpar\adjustright \fs20\cgrid \snext0 Normal;}{\s1\keepn\nowidctlpar\widctlpar\adjustright \b\i\fs20\cgrid \sbasedon0 \snext0 heading 1;}{\s2\keepn\nowidctlpar\widctlpar\adjustright \b\fs20\cgrid 
\sbasedon0 \snext0 heading 2;}{\s3\li720\keepn\nowidctlpar\widctlpar\adjustright \b\fs20\cgrid \sbasedon0 \snext0 heading 3;}{\*\cs10 \additive Default Paragraph Font;}{\s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid \sbasedon0 \snext15 Body Text;}{
\s16\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid \sbasedon0 \snext16 Body Text 2;}{\s17\li5760\nowidctlpar\widctlpar\adjustright \fs22\cgrid \sbasedon0 \snext17 Body Text Indent 2;}{\s18\li720\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid 
\sbasedon0 \snext18 Body Text Indent 3;}}{\info{\title INSTALLATION:            Ceramic, Mosaic, Quarry, Paver, Slate, Marble and Granite}{\author Diana Chiodi}{\operator VISCOMM}{\creatim\yr1999\mo5\dy20\hr8\min46}{\revtim\yr1999\mo5\dy20\hr8\min46}
{\version2}{\edmins0}{\nofpages4}{\nofwords1289}{\nofchars7349}{\*\company  }{\nofcharsws9025}{\vern71}}\widowctrl\ftnbj\aenddoc\formshade\viewkind1\viewscale110\pgbrdrhead\pgbrdrfoot \fet0\sectd \linex0\endnhere\sectdefaultcl {\*\pnseclvl1
\pnucrm\pnstart1\pnindent720\pnhang{\pntxta .}}{\*\pnseclvl2\pnucltr\pnstart1\pnindent720\pnhang{\pntxta .}}{\*\pnseclvl3\pndec\pnstart1\pnindent720\pnhang{\pntxta .}}{\*\pnseclvl4\pnlcltr\pnstart1\pnindent720\pnhang{\pntxta )}}{\*\pnseclvl5
\pndec\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl6\pnlcltr\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl7\pnlcrm\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl8\pnlcltr\pnstart1\pnindent720\pnhang
{\pntxtb (}{\pntxta )}}{\*\pnseclvl9\pnlcrm\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}\pard\plain \li5685\nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b INSTALLATION:            Ceramic, Mosaic, Quarry, Paver, Slate, Marble and Granite
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par 
\par }{\b\fs32 SPECIFICATION}{\fs32 \tab }{\tab \tab \tab              }{\b\fs44 KERALASTIC}{
\par }\pard\plain \s17\li5760\nowidctlpar\widctlpar\adjustright \fs22\cgrid {\fs20 Flexible Polymer-Modified Portland Cement Mortar System
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par *
\par }{\b\i DESCRIPTION:}{\i  A unique polymer additive designed to be used with KERABOND dry-set mortar for increased bond strength improved vibration and impact resistance and to provide freeze/thaw resistance.  The KERALASTIC/KERABOND system is ideal for d
ifficult-to-bond natural stone, large porcelain, and glass-bodied tiles.}{
\par 
\par 
\par }\pard\plain \s18\li720\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Specify for interior and exterior installation of ceramic tile and natural stone over most approved substrates on floors, walls, and ceilings.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify for all traditional substrate
s as well as over existing cutback adhesive, vinyl asbestos tiles (residential and light commercial applications), and exterior grade plywood (interior residential floors and countertops in dry areas only).}{
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify for setting impervious and vitreous ceramic tiles and most \ldblquote difficult-to-bond\rdblquote 
 tile, such as porcelain, glass mosaic, monocottura, quarry, paving brick, gauged slate, polished-back marble, and granite.}{
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify for all residential applications, shopping malls and plazas, commercial buildings and even industrial installations.}{
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard \fi720\nowidctlpar\widctlpar\adjustright {\i Specify\tab for high use and abuse areas such as schools, airports, prisons and public toilet rooms.
\par 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i The KERALASTIC/KERABOND mortar system was not designed to be a highly chemical resistant mortar.  Specify KERAPOXY\'ae for such applications.  (See data sheet for details.)}{
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\b\i DO NOT}{\i  specify for setting Rosso Levanto and Negro Marquina marble or green marble or green granite and their agglomerates. Specify PLANICRETE\'aeW or KERAPOXY\'ae
.  When specifying light colored and translucent marble, and their agglomerated, specify White GRANI/RAPID or White KERAQUICK M.  (See data sheets for details.)
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard\plain \s1\li720\keepn\nowidctlpar\widctlpar\outlinelevel0\adjustright \b\i\fs20\cgrid {DO NOT}{\b0  specify over particle board, masonite, chipboard, Lauan, gypsum floor patching compounds, metal or similar dimensionally unstable materials.}{

\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i When specifying KERALASTIC in the Tile Selection selected \endash  ceramic, mosaic, quarry, paver, slate, marble or granite \endash  add appropriate articles or paragraphs under the applicable }{\b\i 
PART}{\i  as indicated.}{
\par }\pard \nowidctlpar\widctlpar\adjustright {*
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {PART 1 GENERAL
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s2\li720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {REFERENCES
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {ANSI A108.5 - Installation Specification for Ceramic Tile Installed with Dry-Set Portland Cement Mortar or Latex-Portland Cement Mortar
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {ANSI A118.4 - Material Specification for Latex\endash Portland Cement Mortar
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {ANSI A137.1 - Material Specification for Ceramic Tile
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Tile Council of America, Inc. (TCA) \endash  Handbook for Ceramic Tile Installation
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }\pard\plain \s2\li720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {SUBMITTALS}{\b0 
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Product Data: Submit manufacturer\rquote s technical information and installation instructions for materials required.
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {QUALITY ASSURANCE
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s16\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Provide tile, grout and setting materials from one source.  Additives, dry-set mortars, installation materials and grouts shall be from the same manufacturer.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {DELIVERY, STORAGE AND HANDLING
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Deliver and store packaged mater
ials in original containers with seals unbroken and labels intact until time of use.  Prevent damage or contamination to materials by water, freezing, foreign matter or other causes.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {If frozen, do not stir until material has completely thawed.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \s16\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Deliver and store materials on site at least 24 hours before work begins.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Provide heated and dry storage facilities on site.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \s2\li720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {PROJECT CONDITIONS}{\b0 
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Maintain environmental conditions and protect work during and after installation to comply with referenced standards and manufacturer\rquote s printed recommendations.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Vent temporary heaters to exterior to prevent damage to tile work from carbon dioxide build-up.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Maintain temperature at not less than 50 degrees F (10 degrees C) in tiled areas during installation and for 7 days 
after completion, unless higher temperatures are required by referenced installation standards or manufacturer\rquote s printed instructions.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {PART 2 PRODUCTS
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s2\li720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {MORTAR MATERIALS}{\b0 
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {FLEXIBLE POLYMER-MODIFIED PORTLAND CEMENT MORTAR: KERALASTIC System, as manufactured 
by MAPEI CORPORATION, ANSI A118.4.  Universal two-component setting system, consisting of KERALASTIC liquid synthetic polymer additive and KERABOND dry-set mortar with the polymer having the following characteristics:
\par 
\par }\trowd \trgaph108\trleft720\trbrdrt\brdrs\brdrw10 \trbrdrl\brdrs\brdrw10 \trbrdrb\brdrs\brdrw10 \trbrdrr\brdrs\brdrw10 \trbrdrh\brdrs\brdrw10 \trbrdrv\brdrs\brdrw10 \clvertalt\clbrdrt\brdrs\brdrw10 \clbrdrl\brdrs\brdrw10 \clbrdrb\brdrs\brdrw10 \clbrdrr
\brdrs\brdrw10 \cltxlrtb \cellx4230\clvertalt\clbrdrt\brdrs\brdrw10 \clbrdrl\brdrs\brdrw10 \clbrdrb\brdrs\brdrw10 \clbrdrr\brdrs\brdrw10 \cltxlrtb \cellx6480\pard \nowidctlpar\widctlpar\intbl\adjustright {Polymer Category:\cell Acrylic Copolymer\cell 
}\pard \nowidctlpar\widctlpar\intbl\adjustright {\b \row }\trowd \trgaph108\trleft720\trbrdrt\brdrs\brdrw10 \trbrdrl\brdrs\brdrw10 \trbrdrb\brdrs\brdrw10 \trbrdrr\brdrs\brdrw10 \trbrdrh\brdrs\brdrw10 \trbrdrv\brdrs\brdrw10 \clvertalt\clbrdrt
\brdrs\brdrw10 \clbrdrl\brdrs\brdrw10 \clbrdrb\brdrs\brdrw10 \clbrdrr\brdrs\brdrw10 \cltxlrtb \cellx4230\clvertalt\clbrdrt\brdrs\brdrw10 \clbrdrl\brdrs\brdrw10 \clbrdrb\brdrs\brdrw10 \clbrdrr\brdrs\brdrw10 \cltxlrtb \cellx6480\pard 
\nowidctlpar\widctlpar\intbl\adjustright {Solids Content (%):\cell 28.0-32.0\cell }\pard \nowidctlpar\widctlpar\intbl\adjustright {\b \row }\pard \nowidctlpar\widctlpar\intbl\adjustright {pH:\cell 6.5-8.0\cell }\pard 
\nowidctlpar\widctlpar\intbl\adjustright {\b \row }\pard \nowidctlpar\widctlpar\intbl\adjustright {Specific Gravity (water=1)\cell 1.026\cell }\pard \nowidctlpar\widctlpar\intbl\adjustright {\b \row }\pard \nowidctlpar\widctlpar\intbl\adjustright {
Glass Transition Temperature\cell -4\cell }\pard \nowidctlpar\widctlpar\intbl\adjustright {\b \row }\trowd \trgaph108\trleft720\trbrdrt\brdrs\brdrw10 \trbrdrl\brdrs\brdrw10 \trbrdrb\brdrs\brdrw10 \trbrdrr\brdrs\brdrw10 \trbrdrh\brdrs\brdrw10 \trbrdrv
\brdrs\brdrw10 \clvertalt\clbrdrt\brdrs\brdrw10 \clbrdrl\brdrs\brdrw10 \clbrdrb\brdrs\brdrw10 \clbrdrr\brdrs\brdrw10 \cltxlrtb \cellx4230\clvertalt\clbrdrt\brdrs\brdrw10 \clbrdrl\brdrs\brdrw10 \clbrdrb\brdrs\brdrw10 \clbrdrr\brdrs\brdrw10 \cltxlrtb 
\cellx6480\pard \nowidctlpar\widctlpar\intbl\adjustright {Particle Size (um)\cell 0.25-0.35\cell }\pard \nowidctlpar\widctlpar\intbl\adjustright {\b \row }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }{*
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {When specifying KERALASTIC system in performance specification, call MAPEI CORPORATION\rquote s Technical Service Department toll-free number for assistance with product characteristics.

\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {When specifying GROUT MATERIALS, refer to respective suggested grout specification \endash  ULTRA/COLOR sande
d polymer-modified cementitious grout or KER 200 sanded polymer-modified Portland cement tile grout or KER 800 unsanded polymer-modified Portland cement tile grout  (ANSI A118.6) or KERAPOXY 100% solids epoxy grout (ANSI A118.3).  Grout tiles according to
 grout instructions and ANSI A108.10 or A108.6 specifications.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par 
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {MIXES
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }{Proportion and mix factory-prepared mortar in accordance with manufacturer\rquote s printed instructions.
\par }{\b 
\par PART 3 EXECUTION
\par 
\par }{*
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Specifications for surface conditions are listed in the beginning of the specification of MAPEI\rquote s Architectural Notebook.  These specifications should
 be called out with the related work sections.  Delete non-applicable conditions.  (refer to ANSI EXPLANATION AND NOTES section:  AN-3 RELATED WORK SPECIFIED IN OTHER SECTIONS.)
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par 
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {EXAMINATION
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par Examine surfaces to receive tile work and conditions under which tile will be installed.  Do not proceed with tile work until surfaces and conditions comply with requirements indicated in referenced tile installation standard and manufacturer\rquote 
s printed instructions.
\par 
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {INSTALLATION
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par Install tile in accordance with manufacturer\rquote s printed instructions and ANSI A 108.5.
\par 
\par *
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Select TCA method to be used and delete non-applicable methods.  (Select from latest edition of the TCA Handbook.)
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\i *
\par }{
\par \tab [Floor Tile: Install in accordance with TCA method
\par \tab [F101], [F102], [F103], [F111], [F112], [F113], [F114],
\par }\pard \fi720\nowidctlpar\widctlpar\adjustright {[F115], [F121], [F122], [F141], [F144], [TR712], [TR912.].]
\par 
\par [Wall Tile: Install in accordance with TCA method
\par [W201], [W202], [W211], [W221], [W222], [W231], [W241],
\par [W243], [244], [B412], [B413], [B414], [B415], [TR711], [TR713].]
\par 
\par [Ceiling or Soffit Tile: Install in accordance with TCA method C331.]
\par 
\par [Countertop Tile: Install in accordance with TCA method [C511], [C512], [C513].]
\par 
\par [Swimming Pool Tile: Install in accordance with TCA method P601.]
\par 
\par [Tub and Fountain Tile: Install in accordance with TCA method B417.]
\par 
\par [Refrigerator Room Tile: Install in accordance with TCA method R612.]
\par 
\par [Steam Room Tile: Install in accordance with TCA method SR613.]
\par 
\par [Stair Tile: Install in accordance with TCA method S151.]
\par 
\par Install expansion and control joints in accordance with TCA method EJ171.
\par 
\par Grout joints shall be clean and free from standing water, dust and foreign substances.
\par 
\par Tile surfaces shall be clean and dry.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par 
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {PROTECTION
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par *
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Select appropriate statements for installation - floor, wall or both.  Delete non-applicable statements.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par 
\par }\pard\plain \s16\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {[Protect floor from general traffic for at 
least 71 hours after installation.  Plywood or stepping boards may be used after 24 hours when occasional stepping on the floor is unavoidable.]
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s16\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {[Protect walls from impact, vibration and heavy hammering on adjacent and opposite walls for at least 14 days after installation.]
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s16\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Protect from freezing and total water immersion for at least 21 days after installation.
\par }\pard \s16\nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par When dealing with cement-based products, it should be not
ed that temperature and humidity during and after installation of tile affect final curing time, i.e., low temperatures (60 degrees and under) and high humidity (70% and above) will delay final cure time.
\par *
\par 
\par For further information and technical assistance, contact:
\par 
\par }\pard \sa120\nowidctlpar\widctlpar\adjustright {\tab \tab \tab \tab      MAPEI CORPORATION
\par \tab \tab \tab \tab      1501 WALL STREET
\par \tab \tab \tab \tab      GARLAND, TEXAS 75041\endash 4046
\par \tab \tab \tab \tab      1-800-992-6273
\par }}