ÃÛÌÒÓ°Ïñ

DURASTEEL DETAILS AND SPECIFICATIONS

1. Scope

1.1 Product
Furnish Durasteel Model _______ as manufactured by Porta-King Building systems, or pre-approved equal.

2. Materials

2.1 Product Construction
Building to be of welded connections ground smooth. Overall height to be 89" for interior use, or 95" with exterior roof.

2.2 Structural Framework
Structural corners and uprights to be 2" x 2" x .120 structural ASTM A500 Grade B welded tubing.

2.3 Wall Panels
Walls to be 14 gauge galvanized steel on exterior and 16 gauge galvanized steel on interior. Wall thickness to be 2" and insulated to R-10.

2.4 Finish
Exterior surfaces to be full flush, smooth without visible seams or caulked joints. Interior wall surfaces to be flush, smooth welded construction with no exposed fasteners. All surfaces to be electrostatically painted with a rust inhibitive epoxy primer and shall have a painted enamel finish.

2.5 Floor Structure
Floor to be 1 1/2" solid waterproof insulating core fit tight against wall panels and fastened to bottom 12 gauge galvanized structural base frame. The finished floor to be maintenance-free 3003 TREADBRITE aluminum safety treadplate.

2.6 Ceiling
Ceiling to be 14 gauge galvanized steel. Roof to have R-19 insulation and protective membrane on top-side.

2.7 Doors
Doors to be of anodized aluminum, 1 3/4" thick, and half-glazed with tempered safety glass. Bottom portion to include insulated panel with smooth anodized aluminum.

2.7.1 Sliding door to be top-suspended in overhead track assembly and to be fully weatherstripped. Sliding doors to incorporate a maximum security laminated hookbolt deadlock with removable cylinders. Door to be recessed into the floor structure.

2.7.1 Swing door to be fully weatherstripped with key-in-knob lockset.

2.7.2 Transaction booths to have a horizontal sliding cashier window in the door.

2.8 Windows
Windows to have anodized aluminum frames and insert frames and to be of industrial quality with active window panel to slide horizontally on stainless steel, ballbearing rollers (plastic rollers are not acceptable). Windows to include inside positive camlocking device. Exterior window sill height to be 38" (inside 34" from finished floor).

2.9 Glass-Glazing
All glazing to be tempered/safety glass.

2.10 Counter
Furnish 22" deep, full width counter, 32" from finished floor and with walnut grain plastic laminate.

2.11 Electrical Service
All components to bear UL label. Electric service to include single phase, 100 AMP capacity load center, pre-wired in conduit, with one 230v and four 115v circuit capability. Furnish one (1) 115v duplex and one (1) 230v single outlets. Electric work to be in conformation with the NEC. Provide one (1) 6" x 12" conduit access cutout, with removable cover, in the floor.

2.11.1 Lights to be fluorescent type fixtures with acrylic lens.

2.12 Exterior Roof
Exterior weatherproof roof to be of 14 gauge galvanized steel and to include a 3" overhang with a 6' fascia. Roof to be shipped installed.