{\rtf1\ansi\ansicpg1252\uc1 \deff0\deflang1033\deflangfe1033{\fonttbl{\f0\froman\fcharset0\fprq2{\*\panose 02020603050405020304}Times New Roman;}}{\colortbl;\red0\green0\blue0;\red0\green0\blue255;\red0\green255\blue255;\red0\green255\blue0;
\red255\green0\blue255;\red255\green0\blue0;\red255\green255\blue0;\red255\green255\blue255;\red0\green0\blue128;\red0\green128\blue128;\red0\green128\blue0;\red128\green0\blue128;\red128\green0\blue0;\red128\green128\blue0;\red128\green128\blue128;
\red192\green192\blue192;}{\stylesheet{\nowidctlpar\widctlpar\adjustright \fs20\cgrid \snext0 Normal;}{\s1\keepn\nowidctlpar\widctlpar\adjustright \b\i\fs20\cgrid \sbasedon0 \snext0 heading 1;}{\s2\keepn\nowidctlpar\widctlpar\adjustright \b\fs20\cgrid 
\sbasedon0 \snext0 heading 2;}{\s3\li720\keepn\nowidctlpar\widctlpar\adjustright \b\fs20\cgrid \sbasedon0 \snext0 heading 3;}{\*\cs10 \additive Default Paragraph Font;}{\s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid \sbasedon0 \snext15 Body Text;}{
\s16\li5040\nowidctlpar\widctlpar\adjustright \b\fs28\cgrid \sbasedon0 \snext16 Body Text 2;}{\s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid \sbasedon0 \snext17 Body Text Indent 2;}}{\info{\author Diana Chiodi}{\operator VISCOMM}
{\creatim\yr1999\mo5\dy19\hr17\min8}{\revtim\yr1999\mo5\dy19\hr17\min8}{\version2}{\edmins1}{\nofpages4}{\nofwords1039}{\nofchars5927}{\*\company  }{\nofcharsws7278}{\vern71}}\widowctrl\ftnbj\aenddoc\formshade\viewkind1\viewscale110\pgbrdrhead\pgbrdrfoot 
\fet0\sectd \linex0\endnhere\sectdefaultcl {\*\pnseclvl1\pnucrm\pnstart1\pnindent720\pnhang{\pntxta .}}{\*\pnseclvl2\pnucltr\pnstart1\pnindent720\pnhang{\pntxta .}}{\*\pnseclvl3\pndec\pnstart1\pnindent720\pnhang{\pntxta .}}{\*\pnseclvl4
\pnlcltr\pnstart1\pnindent720\pnhang{\pntxta )}}{\*\pnseclvl5\pndec\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl6\pnlcltr\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl7\pnlcrm\pnstart1\pnindent720\pnhang{\pntxtb (}
{\pntxta )}}{\*\pnseclvl8\pnlcltr\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl9\pnlcrm\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}\pard\plain \fi720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {\tab \tab \tab \tab \tab \tab }{
\b INSTALLATION:
\par \tab \tab \tab \tab \tab \tab Ceramic Wall Tile, Mosaic, and Marble
\par }\pard \li5040\nowidctlpar\widctlpar\adjustright {\b 
\par }\pard \nowidctlpar\widctlpar\adjustright {\b\fs32 
\par 
\par }\pard\plain \s16\nowidctlpar\widctlpar\adjustright \b\fs28\cgrid {\b0\fs32 SPECIFICATION}{\fs32 \tab }{\tab \tab \tab }{\fs44 KER 800 SERIES}{\fs20 
\par }\pard \s16\li5040\nowidctlpar\widctlpar\adjustright {\b0\fs20 Unsanded Polymer-Modified Portland Cement Grout}{\b0 
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par *
\par }{\b\i DESCRIPTION: }{\i Dry curing, unsanded polymer-modified Portland cement grout for non-vitreous ceramic glazed wall tiles.  KER 800 is available in a broad range of modern designers colors and requires only the addition of water for mixing.
\par 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify for grouting interior tile installation on walls.
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify for grouting glazed ceramic wall tiles
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify for grouting marble tile (see LIMITATIONS and CAUTION in data sheet).
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify strictly for grouting narrow joints 1/16\rdblquote  to 1/8\rdblquote (1,5 to 3mm) wide MAXIMUM.
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\b\i DO NOT }{\i specify for grouting joints greater than 1/8\rdblquote  (3mm) wide on floors.  Specify ULTRA/COLOR, KER 200 or KERAPOXY (see respective data sheets for details).
\par }\pard \nowidctlpar\widctlpar\adjustright {\b\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\b\i DO NOT}{\i  specify for grouting EXTERIOR tile or stone installations.  Specify sanded ULTRA/COLOR}{\b\i  }{\i or KER 200 grouts instead (see respective data sheets for details).
\par }\pard \nowidctlpar\widctlpar\adjustright {\b\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\b\i DO NOT}{\i  specify for grouting vitreous or semi-vitreous tiles, slate or natural stone.  Specify sanded ULTRA/ COLOR or KER 200 grouts instead (see respective data sheets for details).
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\b\i DO NOT}{\i  specify where chemical and stain resistance is required.  Specify KERAPOXY instead (see data sheets for details).
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i When specifying KER 800 Grout in the Tile Selection selected \endash  ceramic, mosaic, or marble \endash  add appropriate articles or paragraphs under the applicable }{\b\i PART}{\i  as indicated.}{

\par }\pard \nowidctlpar\widctlpar\adjustright {*
\par 
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {PART 1 GENERAL
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {REFERENCES
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {ANSI A108.10 \endash  Installation Specification for Grout in Tile Work
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {ANSI A118.6 \endash  Material Specifications for Ceramic Tile Grout
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {ANSI A 137.1 \endash  Material Specification for Ceramic Tile
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Tile Council of America, Inc. (TCA) \endash  Handbook for Ceramic Tile Installation
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {SUBMITTALS
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Product Data: Submit manufacturer\rquote s technical information and installation instructions for materials required.
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {QUALITY ASSURANCE
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Provide tile, grout and setting materials from one source. Additives, dry-set mortars, installation materials and grouts shall be from the same manufacturer.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard \fi720\nowidctlpar\widctlpar\adjustright {\b DELIVERY, STORAGE AND HANDLING
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Deliver and store packaged materials in original c
ontainers with seals unbroken and labels intact until time of use. Prevent damage or contamination to materials by water, freezing, foreign matter or other causes.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Deliver and store materials on site at least 24 hours before work begins.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Provide heated and dry storage facilities on site.
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {PROJECT CONDITIONS
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Maintain environmental conditions and protect work during and after installation to comply with referenced standards and manufacturer\rquote s printed recommendations.
\par }\pard \s17\nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*}{\i Environmental conditions may have an effect on the final color of Portland Cement Grouts.}{
\par *
\par }{\b 
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Vent temporary heaters to exterior to prevent damage to tilework from carbon dioxide build-up.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Maintain temperature at not less than 50 degrees F (10 degrees C) in tiled areas during installation and for 7 days after completion, unless higher temperatures are required by referenced in
stallation standards or manufacturer\rquote s written instructions.
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par PART 2 PRODUCTS
\par }{
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {GROUT MATERIALS
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {LATEX-MODIFIED PORTLAND CEMENT GROUT: KER 800 Unsanded Polymer-Modified Portland Cement Grout as manufactured by MAPEI CORPORATION, ANSI A118.6.
\par }\pard \s17\nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\i *}{\b 
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {When specifying KER 800 in performance specification, Call MAPEI CORPORATION\rquote s Technical Service Department toll-free number for assistance with product characteristics.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\i 
\par When specifying MORTARS or ADHESIVE MATERIALS refer to respective suggested mortar or adhesive specification.
\par }{*
\par 
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {MIXES
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Proportion and mix factory-prepared mortar in accordance with manufacturer\rquote s printed instructions.
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par PART 3 EXECUTION
\par 
\par }{*
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Specifications for surface conditions are listed in the beginning of the specification of MAPEI\rquote s Architectural Bi
nder.  These specifications should be called out with the related work sections.  Delete non-applicable conditions.  (Refer to ANSI EXPLANATION AND NOTES section: AN-3 RELATED WORK SPECIFIED IN OTHER SECTIONS.)
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par 
\par }\pard\plain \s2\li720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {INSTALLATION
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Grout in accordance with manufacturer\rquote s printed instructions and ANSI A108.10.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par *
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Select TCA method to be used and delete non-applicable methods.  (Select from latest edition of the TCA Handbook.)
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\i *
\par }{
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {[Floor Tile: Install in accordance with TCA method
\par [F101], [F102], [F103], [F111], [F112], [F113], [F116],
\par [F121], [F122], [F141], [F144], [TR712], [TR912].]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {[Wall Tile: Install in accordance with TCA method
\par [W201], [W202], [W211], [W221], [W222], [W231], [W241],
\par [W242], [W243], [W244], [B411], [B412], [B413], [B414], [B415], 
\par }\pard \fi720\nowidctlpar\widctlpar\adjustright {[B416], [B417], [TR711], [TR713].]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {[Ceiling or Soffit Tile: Install in accordance with TCA method C311.]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {[Swimming Pool Tile: Install in accordance with TCA method P601.]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \fi720\nowidctlpar\widctlpar\adjustright {[Tub and Fountain Tile: Install in accordance with TCA method B417.]
\par 
\par [Steam Room Tile: Install in accordance with TCA method SR613.]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Install expansion and control joints in accordance with TCA method EJ171.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Grout joints shall be clean and free from standing water, dust and foreign substances.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Tile surfaces shall be clean and dry.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s2\fi720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {PROTECTION
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par *
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Select appropriate statements for installation \endash  floor, wall or both.  Delete non-applicable statements.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {[Protect floors from general traffic for at least 72 hours after installation.  Plywood or stepping boards may be used after 24 hours when occasional stepping on the floor is unavoidable.]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {[Protect walls from impact, vibration and heavy hammering on adjacent and opposite walls for at least 14 days after installation.]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \fi720\nowidctlpar\widctlpar\adjustright {Protect from freezing and total water immersion for at least 21 days after installation.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par *
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {
When dealing with cement-based products, it should be noted that temperature and humidity during and after installation of tile affect final curing time, i.e., low temperatures (60 degrees and under) and high humidity (70% and above) will delay 
final cure time.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par 
\par For further information and technical assistance, contact:
\par 
\par }\pard \sa120\nowidctlpar\widctlpar\adjustright {\tab \tab \tab \tab      MAPEI CORPORATION
\par \tab \tab \tab \tab      1501 WALL STREET
\par \tab \tab \tab \tab      GARLAND, TEXAS 75041-4046
\par \tab \tab \tab \tab      1-800-992-6273
\par }}