{\rtf1\ansi\ansicpg1252\uc1 \deff0\deflang1033\deflangfe1033{\fonttbl{\f0\froman\fcharset0\fprq2{\*\panose 02020603050405020304}Times New Roman;}}{\colortbl;\red0\green0\blue0;\red0\green0\blue255;\red0\green255\blue255;\red0\green255\blue0;
\red255\green0\blue255;\red255\green0\blue0;\red255\green255\blue0;\red255\green255\blue255;\red0\green0\blue128;\red0\green128\blue128;\red0\green128\blue0;\red128\green0\blue128;\red128\green0\blue0;\red128\green128\blue0;\red128\green128\blue128;
\red192\green192\blue192;}{\stylesheet{\nowidctlpar\widctlpar\adjustright \fs20\cgrid \snext0 Normal;}{\s1\keepn\nowidctlpar\widctlpar\adjustright \b\i\fs20\cgrid \sbasedon0 \snext0 heading 1;}{\s2\keepn\nowidctlpar\widctlpar\adjustright \b\fs20\cgrid 
\sbasedon0 \snext0 heading 2;}{\s3\li720\keepn\nowidctlpar\widctlpar\adjustright \b\fs20\cgrid \sbasedon0 \snext0 heading 3;}{\*\cs10 \additive Default Paragraph Font;}{\s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid \sbasedon0 \snext15 Body Text;}{
\s16\li5040\nowidctlpar\widctlpar\adjustright \b\fs28\cgrid \sbasedon0 \snext16 Body Text 2;}{\s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid \sbasedon0 \snext17 Body Text Indent 2;}{\s18\li720\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid 
\sbasedon0 \snext18 Body Text Indent 3;}}{\info{\author Diana Chiodi}{\operator VISCOMM}{\creatim\yr1999\mo5\dy20\hr8\min58}{\revtim\yr1999\mo5\dy20\hr8\min58}{\version2}{\edmins0}{\nofpages4}{\nofwords1164}{\nofchars6640}{\*\company  }{\nofcharsws8154}
{\vern71}}\widowctrl\ftnbj\aenddoc\formshade\viewkind1\viewscale110\pgbrdrhead\pgbrdrfoot \fet0\sectd \linex0\endnhere\sectdefaultcl {\*\pnseclvl1\pnucrm\pnstart1\pnindent720\pnhang{\pntxta .}}{\*\pnseclvl2\pnucltr\pnstart1\pnindent720\pnhang{\pntxta .}}
{\*\pnseclvl3\pndec\pnstart1\pnindent720\pnhang{\pntxta .}}{\*\pnseclvl4\pnlcltr\pnstart1\pnindent720\pnhang{\pntxta )}}{\*\pnseclvl5\pndec\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl6\pnlcltr\pnstart1\pnindent720\pnhang{\pntxtb (}
{\pntxta )}}{\*\pnseclvl7\pnlcrm\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl8\pnlcltr\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}{\*\pnseclvl9\pnlcrm\pnstart1\pnindent720\pnhang{\pntxtb (}{\pntxta )}}\pard\plain 
\fi720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {\tab \tab \tab \tab \tab \tab }{\b INSTALLATION:
\par \tab \tab \tab \tab \tab \tab Large Ceramic Tile, Quarry, Paver
\par \tab \tab \tab \tab \tab \tab Marble and Dimension Stone
\par }\pard \nowidctlpar\widctlpar\adjustright {\b\fs32 
\par 
\par }\pard\plain \s16\nowidctlpar\widctlpar\adjustright \b\fs28\cgrid {\b0\fs32 SPECIFICATION}{\fs32 \tab }{\tab \tab \tab }{\fs44 ULTRA/FLOR
\par }{\b0 \tab \tab \tab \tab \tab \tab \tab }{\b0\fs22 Medium Bed Dry-Bed Mortar
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par 
\par *
\par }{\i DESCRIPTION: A medium-bed dry-set mortar for interior and exterior setting of large modular tile, including high lugged tile, brick paver, and dimension stone.  Designed to be used between 3/8\rdblquote  (10mm) and 3/4\rdblquote 
 (19 mm) thickness to minimize leveling and back buttering and to give better support under the larger tile modules.  (See technical data sheet for additional information.).
\par 
\par }\pard\plain \s18\li720\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Specify for interior and exterior floor installations.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify over properly prepared concrete, masonry block, cement mortars or leveling coats, cementitious backer units and gypsum wallboard.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify for installing large size or high lugged and heavy ribbed-back ceramic tiles, monocottura, brick paver, marble, dimension and natural stone tile.
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify ULTRA/FLOR with KERAPLY for improved 
performance over concrete when installing impervious porcelain-type tiles and for interior installation over exterior grade plywood.  (See data sheets for details.)}{
\par }\pard \nowidctlpar\widctlpar\adjustright {\i 
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\i Specify ULTRA/FLOR with KERAPLY for installation of large size impervious tiles and natural slate.  (See data sheet for details.) }{
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\b\i DO NOT}{\i  specify for installing light colored and translucent marble and their agglomerates, specify white GRANI/RAPID or white KERAQUICK M..  (See data sheets for details.)}{
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {\b\i DO NOT}{\i  specify over presswood, particleboard, chipboard, masonite, asbestos board, Lauan, gypsum floor patching compounds, metal or similar dimensionally unstable substrates.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \s18\li720\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {When specifying ULTRA/FLOR in the Tile Section selected \endash  ceramic, quarry, paver, marble or dimensional stone \endash  add appro
priate articles or paragraphs under the applicable }{\b PART}{ as indicated.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {PART 1 GENERAL
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s2\li720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {REFERENCES
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {ANSI A108.5 - Installation Specification for Ceramic Tile Installed with Dry-Set Portland Cement Mortar or Latex-Portland Cement Mortar
\par 
\par }\pard\plain \s1\fi720\keepn\nowidctlpar\widctlpar\outlinelevel0\adjustright \b\i\fs20\cgrid {\b0\i0 ANSI A118.1 \endash  Material Specifications for Dry-Set Portland Cement Mortar
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s2\fi720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {\b0 ANSI A137.1 \endash  Material Specification for Ceramic Tile
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Tile Council of America, Inc. (TCA) \endash  Handbook for Ceramic Tile Installation
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {SUBMITTALS
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Product Date: submit manufacturer\rquote s technical information and installation instructions for materials required.}{\b 
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {QUALITY ASSURANCE
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Provide tile, grout and setting materials from one source.  Additives, dry-set mortars, installation materials and grouts shall be from the same manufacturer.
\par }\pard \nowidctlpar\widctlpar\adjustright {\b 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {DELIVERY, STORAGE AND HANDLING
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Deliver and store packaged materials in original containers with seals unbroken and labels intact until time of use.  Prevent damage or contamination to materi
als by water, freezing, foreign matter or other causes.
\par }\pard\plain \li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par Deliver and store materials on site at least 24 hours before work begins.
\par 
\par Provide heated and dry storage facilities on site.
\par 
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {PROJECT CONDITIONS
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Maintain environmental conditions and protect work during and after installation to comply with referenced standards and manufacturer\rquote s printed recommendations.
\par }\pard\plain \li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par Vent temporary heaters to exterior to prevent damage to tile work from carbon dioxide build-up.
\par 
\par Maintain temperature at not less than 50 degrees F (10 degrees C) in tiled areas during installation and for 7 days after completion, unless higher temperatures are required by referenced installation standards or manufacturer\rquote 
s printed instructions.
\par 
\par }\pard \nowidctlpar\widctlpar\adjustright {\b PART 2 PRODUCTS
\par }{
\par }\pard\plain \s3\li720\keepn\nowidctlpar\widctlpar\outlinelevel2\adjustright \b\fs20\cgrid {MORTAR MATERIALS
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {MEDIUM BED DRY-SET
 MORTAR: ULTRA/FLOR medium bed dry-set mortar, as manufactured by MAPEI CORPORATION: meets ANSI A118.1 bond strength requirements.  Designed for application between 3/8\rdblquote  (9.5 mm) and 3/4\rdblquote  (19mm).
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }{\i *}{\b 
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {When specifying ULTRA/FLOR in performance specification, call MAPEI CORPORATION\rquote s Technical Service Department toll-free number for assistance with product characteristics.
\par 
\par Specify KERAPLY acrylic latex additive with ULTRA/FLOR dry-set mortar when specifying LATEX-PORTLAND CEMENT MORTAR.  This setting system meets ANSI A118.4 bond strength requirements.  (See specification sheet.)
\par 
\par When specifying GROUT MATERIALS, refer to respective suggested grout specification \endash  ULTRA/COLOR p
olymer-modified sanded grout or KER 200 Sanded Polymer-Modified Portland Cement Ceramic Tile Grout or KER 800 Unsanded Polymer-Modified Portland Cement Ceramic Tile (ANSI A118.6) or KERAPOXY 100% solids epoxy grout (ANSI A118.3).  Grout tiles according to
 grout instructions and ANSI A108.10 or A108.6 specifications.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par 
\par }\pard\plain \s2\li720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {MIXES
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Proportion and mix factory-prepared mortar in accordance with manufacturer\rquote s printed instructions.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\b 
\par PART 3 EXECUTION
\par 
\par }{*
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Specifications for surface conditions are listed in the beginning of the specification of MAPEI\rquote s Architectural Binder.  These specifications should b
e called out with the related work sections.  Delete non-applicable conditions.  (Refer to ANSI EXPLANATION AND NOTES section: AN-3 RELATED WORK SPECIFIED IN OTHER SECTIONS.)
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par 
\par }\pard\plain \s2\fi720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {EXAMINATION
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {
Examine surfaces to receive tile work and conditions under which tile will be installed.  Do not proceed with tile work until surfaces and conditions comply with requirements indicated in referenced tile installation standard and manufacturer\rquote 
s printed instructions.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s2\fi720\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {INSTALLATION
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par }\pard\plain \s17\li720\nowidctlpar\widctlpar\adjustright \fs20\cgrid {Install tile in accordance with manufacturer\rquote s printed instructions and ANSI A108.5.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par *
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {There are TCA methods directly specifying application of medium bed dry-set mortars.  Substitute ULTRA/FLOR where traditional dry-set mortars have been specified.
\par 
\par Select TCA method to be used and delete non-applicable methods.  (Select from latest edition of the TCA Handbook.)
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {\i *
\par }{
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {[Foor Tile: Install in accordance with TCA method
\par [F101], [F102], [F103], [F111], [F112], [F113], [F114], 
\par [F115], [F121], [F122], [F141], [F144], [TR712], [RF912].]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {[Wall Tile: Install in accordance with TCA method 
\par [W201], [W202], [W211], [W221], [W222], [W231], [W241], 
\par [W243], [W244],[B412],[B413],[B414],[B415],[TR713].]
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Install expansion and control joints in accordance with TCA method EJ171.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Grout joints shall be clean and free from standing water, dust and foreign substances.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard \li720\nowidctlpar\widctlpar\adjustright {Tile surfaces shall be clean and dry.
\par }\pard \nowidctlpar\widctlpar\adjustright {
\par }\pard\plain \s2\keepn\nowidctlpar\widctlpar\outlinelevel1\adjustright \b\fs20\cgrid {PROTECTION
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {
\par *
\par }\pard\plain \s15\nowidctlpar\widctlpar\adjustright \i\fs20\cgrid {Select appropriate statements for installation \endash  floor, wall or both.  Delete non-applicable statements.
\par }\pard\plain \nowidctlpar\widctlpar\adjustright \fs20\cgrid {*
\par [Protect floors from general traffic for at least 72 hours after installation.  Plywood or stepping boards may be used after 24 hours when occasional stepping on the floor is unavoidable.]
\par 
\par [Protect walls from impact, vibration and heavy hammering on adjacent and opposite walls for at least 14 days after installation.]
\par 
\par Protect from freezing and total water immersion for at least 21 days after installation.
\par 
\par *
\par When dealing with cement-based products, it should be noted that temperature and humidity during and after installation of tile affect final 
curing time, ie, low temperatures (60 degrees and under) and high humidity (70% and above) will delay final cure time.
\par *
\par 
\par For further information and assistance, contact:
\par 
\par 
\par }\pard \sa120\nowidctlpar\widctlpar\adjustright {\tab \tab \tab \tab      MAPEI CORPORATION
\par \tab \tab \tab \tab      1501 WALL STREET
\par \tab \tab \tab \tab      GARLAND, TEXAS  75041 \endash  4046
\par \tab \tab \tab \tab      1-800-992-6273
\par }}