ÃÛÌÒÓ°Ïñ

architecture - engineering - construction
ÃÛÌÒÓ°Ïñ

Expanded Polystyrene Base from Innovate Building Solutions

 

Choosing the right custom shower base for a bathroom remodeling project can be tough. The options are many – the right selection for you may not be obvious.

This base is 100% waterproof base, available in standard and custom shower designs, made in one piece with no seams, and is light and quick to install.

Advantages

  • 100% waterproof polystyrene base eliminates the potential of future water leaks and worries about mold/mildew.

  • Reduced installation time and labor costs– takes less than 30 minutes to install 1. Trowel out common modified latex thin-set 2. Place a bead of silicone around the drain body 3. Install the pre-designed and pre-slopped pan.

  • Choose your drain location– You won’t have to spend extra money to rework your plumbing to accommodate a pre-determined drain location – we put it where it works best for you.

  • Custom base for non-standard sizes and walk in and roll in showers– design for any size or wall shape (straight, rounded or angled walls) both with or without (barrier free entry) a curb.

  • Seamless Design

  • Wall board is installed inside the base to eliminate leakage.

  • Lower cost than a custom designed solid surface base.

  • Recessed soap dish, shampoo caddy, shower and bench seats available for a complete system.

Disadvantages

Initial purchase costs are slightly higher than a mud set pan base.

@innovatebuild #innovatebuild #shower #remodeling #bathroom

For other relevant searches, you might want to try:

(04 23 00) Glass Unit Masonry
(07 20 00) Thermal Protection
(07 21 13) Board Insulation
(07 21 16) Blanket Insulation
(07 21 19) Foamed-In-Place Insulation
(07 21 23) Loose-Fill Insulation
(07 21 26) Blown Insulation
(07 21 29) Sprayed Insulation
(07 21 53) Reflective Insulation
(07 22 16) Roof Board Insulation
(07 24 13) Polymer-Based Exterior Insulation and Finish System
(07 24 16) Polymer-Modified Exterior Insulation and Finish System
(07 24 19) Water-Drainage Exterior Insulation and Finish System
(07 77 00) Wall Specialties
(08 01 88) Maintenance of Special Function Glazing
(08 41 26) All-Glass Entrances and Storefronts
(08 42 26) All-Glass Entrances
(08 44 26) Structural Glass Curtain Walls
(08 51 69) Metal Storm Windows
(08 52 69) Wood Storm Windows
  (08 54 69) Fiberglass Storm Windows
(08 55 00) Pressure-Resistant Windows
(08 56 00) Special Function Windows
(08 56 46) Radio-Frequency-Interference Shielding Windows
(08 56 49) Radiation Shielding Windows
(08 56 53) Security Windows
(08 56 63) Detention Windows
(08 56 66) Detention Window Screens
(08 56 73) Sound Control Windows
(08 81 00) Glass Glazing
(08 81 13) Decorative Glass Glazing
(08 88 00) Special Function Glazing
(08 95 00) Vents
(09 62 00) Specialty Flooring
(09 76 00) Plastic Blocks
(12 17 00) Art Glass
(23 07 00) HVAC Insulation
(40 40 00) Process Piping and Equipment Protection
(40 42 00) Process Piping and Equipment Insulation