architecture - engineering - construction
|
Extreme Performance Louvers and Grilles from Ruskin
Other News
Subscribe to FREE newsletter
| Mar 14, 2015 |
Louver and Grille products listed in this catalog section are designed and tested for extreme weather conditions. Ruskin "Extreme Performance" Louvers and Grilles are recommended to meet or surpass requirements of severe weather conditions, while protecting life and property.
BL520DD: Blast Resistant Louver
The BL520DD "Blast Resistant" Louver is a Stationary Wind Driven Rain Louver 5" deep with horizontal sightproof blades. It features:
- Independent 3rd Party Tested
- Peak Pressure of 16.6 psi and an Impulse of 84 psi-ms Tested
- ASTM "No Hazard" Hazard Rating
- Meets GSA Performance Condition 2 or Better
- Sight Proof Horizontal Aluminum Blade Construction
- Excellent Pressure Drop Rating
The ELF375DSS Snow Stopper Louver is the first louver specifically designed for applications where snow penetration is a concern. It combines our ELF375DX drainable louver with a heated snow screen in a common sleeve. It features:
- Fine mesh screen to capture snow & prevent its infiltration beyond
- Built-in heat trace in screen to create airflow passage through mesh
- Integral drain fittings built into sleeve to drain away melted snow (piping by others)
- All components are provided assembled in common assembly (assemblies larger than maximum shipping sections will be shipped in multiple sections)
- Controls, sensors, electrical terminations and conduit are provided by others
The L5361 Stationary louver is 4" deep sand removal louver. It features:
- 27% free area.
- Sand efficiency removal of approximately 90% measured during tests described in ASHRAE Standard 52-76 test method.
- Architecturally styled design for pleasing appearance.
- Galvanized steel construction.
The XP500 aluminum stationary extreme weather louver complies with FEMA 361 standard design and meets ICC500 specification for large missile impact. Mounted internally, externally or in conjunction with louvers the XP500 is 5" deep with horizontal sight proof blades. It features:
- Weight = 14 lbs per sq. ft. (65% less than steel)
- 266 psf wind load design
- Large missile impact 15 lb at 100 mph (155 ft per sec)
- Clip angle or flange frame installations
- 53% free area
- Sight proof blades
- 20 year finish warranty with in house 50% and 70% PDVF finishes
The XP500S steeel stationary extreme weather louver complies with FEMA 361 standard design and meets ICC500 specification for large missile impact. Mounted internally, externally or inconjunction with louvers the XP500S is 8" deep with horizontal sight proof blades. It features:
- Weight = 40 lbs pr sq. ft.
- 266 psf wind load design
- Large missile impact 15 lb at 100 mph (155 ft per sec)
- 53% free area
- 1/4" thick hot rolled steel sight proof blades
- 1 year finish warranty with in house 50% and 70% PDVF finishes
For other relevant searches, you might want to try: