NWRT-91: Nawkaw Water Repellant Treatment
Subscribe to FREE newsletter | Jun 12, 2015 |
NWRT-91 is a dual purpose product—a stain for masonry and concrete, plus a water repellent. It enables you to color and protect vertical masonry and concrete surfaces in one easy step. NWRT-91 repels water and protects the masonry against deterioration caused by airborne chemicals including acid rain. NWRT-91 allows moisture vapors to escape and therefore does not promote spalling or similar failure due to moisture trapped in the wall.
Nawkaw Water Repellant Treatment (NWRT-91) is a hydrous, multiple polymer formulation of resin solids, color pigments and a specially formulated tint base, combined to achieve a wide range of colors designed to exhibit the overall characteristics of being: light fast, UV resistant penetrating, aspiratory, and quick drying, while being mold, mildew, fungus and weather resistant. NWRT-91 includes a quality water repellent for added protection.
COVERAGE / TREATMENT YIELD
80-240 sq ft per gallon depending on the absorbency of the substratePHYSICAL PROPERTIES
- Solids (wt) 36-39 %
- Solids (vol) 31-34 %
- Specific Gravity: 1.27 – 1.31
- Viscosity (72° F): 70°-95° KU
- pH: 8.5-9.5
- Gloss: Flat
- Flash Point: None
- Volatile Organic Content (VOC) <5%
- Abrasion Resistance: Excellent
- Penetration: Dependent on Substrate
- Tack Free Time: 3/4 - 1 1/2 hours
- Water Repellency (ASTM C67-80a) Min. Penetration
- Dry Time for reapplication (if required) 4 hours
- Curing: allow 21 days
- Shelf Life 6 months in factory sealed container
APPLICATION
- Coverage rate varies with concrete quality and finish
- Brush, roll or spray
RECOMMENDED FOR:
- Brick, Block & mortar
- Concrete
- Concrete Block
- Precast
- Tilt-up
- In situ
APPLICATION NOTES:
- Verify that any masonry, concrete, stucco walls that have been treated with any form of chemical/acid wash are neutralized.
- Verify that masonry, concrete, stucco, in existing building are structurally sound and fully intact.
- Alkali or efflorescence should be treated with proper neutralizing compounds as recommended by masonry supplier before application can begin. Walls must have a neutral pH for product warranty to be in effect.
- Application of NWRT-91 is possible in temperatures of 25°F to 110°F. Masonry surfaces should be dry before work begins.
- NWRT-91 is applied by spray, roller and hand applications depending on the desired finish.
ENVIRONMENTAL AND SAFETY CONCERNS
NWRT-91 is environmentally friendly, water-based, non-flammable and complies with VOC and other appropriate Government safety standards, legislation and regulatory requirements.For other relevant searches, you might want to try: