Tectum Fabri-Tough Interior Wall Panels set a new standard for durability
Other News Subscribe to FREE newsletter | Jan 13, 2017 |
Tectum Fabri-Tough II allows designers to use any suitable fabric on sound-deadening Tectum Wall Panels. Custom Fabrics and a 1鈦8 inch, 18-pound density fiberglass board are laminated to the face of a Tectum Wall Panel. Fabri-Tough II is perfect for offices, conference rooms and any space where noise reduction is needed and designer fabrics are desired. In spaces where even greater sound absorption is needed, Final茅 Fabri-Tough II provides an NRC up to .85 without sacrificing style.
Control noise efficiently, economically and attractively in open plan, closed or mixed-use space with the Fabri-Tough II Wall Panel System. Efficiently - Tectum panels are known for sound absorption and abuse-resistance. Economically - these panels are competitively priced and will last longer than ordinary, soft- base panels. Attractively - the designer specifies desired fabric brand and pattern.
Fabri-Tough II Kerfed Wall Panels have the fabric wrapped around the edge to the kerf where a plastic spline is inserted for attachment to the wall. Panel ends are square cut but can be wrapped with the fabric as an option.
Fabri-Tough II D茅cor Panels have fully wrapped edges and are attached using 20鈥 Z-Clips allowing for panels to be strategically placed in a space as opposed to consecutive attachment. Fabri-Tough II Wall Panels have a flame spread of 25 or less under the ASTM E84 test method. Panel components meet the requirements of the room corner fire test (UBC 8-2 or equivalent) for use in areas not protected by automatic sprinklers.
For other relevant searches, you might want to try: